I often hear people asking Turntable Guy where to buy vinyl (records or LP’s for those who are younger or less up-to-date with the latest lingo). There are several aspiring Rob Gordon’s out there who once parted with their personal
Technics SP10 MkII in Kiaat & Birch

This was a mix between a box type plinth and a CLD type plinth. The top late is a combination of MDF and 18mm Birch ply and the sides are Kiaat with White Oak and Panga Panga inlays. This plinth
Thorens TD150 in White Ash

I made this box-type White Ash plinth for the Thorens TD turntable with a slightly wider arm board. The plinth was finished with a satin poly-wax finish.
Thorens TD150 with Bubinga

I made a box-type Bubinga plinth for this turntable with a slightly wider arm board. The plinth rested on a 22mm MDF base with high feet. The plinth was finished with a satin poly-wax finish.
Garrard 401 with Bubinga

This was a CLD (constrained layer damping) plinth done with 18mm Birch plywood and a 22mm MDF base. The plinth was wrapped with fine cuts of Bubinga. The armboard was also Bubinga and was designed to be removable and have
Garrard 301 with French Walnut

This was a CLD plinth that was done with 18mm plywood and then wrapped with French Walnut veneer. The finish was a high gloss piano type finish.
Hello world!
Welcome to WordPress. This is your first post. Edit or delete it, then start blogging!