I often hear people asking Turntable Guy where to buy vinyl (records or LP’s for those who are younger or less up-to-date with the latest lingo). There are several aspiring Rob Gordon’s out there who once parted with their personal
This was a mix between a box type plinth and a CLD type plinth. The top late is a combination of MDF and 18mm Birch ply and the sides are Kiaat with White Oak and Panga Panga inlays. This plinth
I made this box-type White Ash plinth for the Thorens TD turntable with a slightly wider arm board. The plinth was finished with a satin poly-wax finish.
I made a box-type Bubinga plinth for this turntable with a slightly wider arm board. The plinth rested on a 22mm MDF base with high feet. The plinth was finished with a satin poly-wax finish.
This was a CLD (constrained layer damping) plinth done with 18mm Birch plywood and a 22mm MDF base. The plinth was wrapped with fine cuts of Bubinga. The armboard was also Bubinga and was designed to be removable and have
This was a CLD plinth that was done with 18mm plywood and then wrapped with French Walnut veneer. The finish was a high gloss piano type finish.